Gypsum Plaster cornice Fiberglass Mold/frame

Gypsum Plaster cornice Fiberglass Mold/frame

Products Category

• FRP(fibreglass reinforced plas • The method of improve the stre • China get back in the plasterb • How to choose gypsum plaster c • Building gypsum powder in the

Contact Us

Name: Micheal
Tel: 0086 20 66692370
Fax: 0086 20 62614092
Mobile: 0086 135 7001 4940
Add: Room 9-206, Dongpu Road 2, Tianhe Area, Guangzhou, Guangdong, China (Mainland) WHATAPPS:+86 13570014940 wechat:13570014940
MSN: Skype: micheal-62 点击这里给我发消息

Partners Glory gypsum plaster moulding drywall Glory gypsum

aluminium alloy mold-More standard

aluminium alloy mold-More standard aluminium alloy mold-More standard aluminium alloy mold-More standard aluminium alloy mold-More standard
Product name锛aluminium alloy mold-More standard
Aluminium alloy mold锛歠or machine making and handmade cornice moulding


vedio of gypsum/plaster cornice making by aluminum alloy mold

Process of gypsum cornice production
·close-up of the mold:
·Preparation 1materials should be prepared in advance:

aluminum alloy mold, scraper, worktable, water, glass fiber, gypsum powder, release oil, brush, shovel, agitation barrel (with volume of 11 liters), plastic rope

·Preparation 2clear dirt from mold with a brush

·10 steps to make gypsum cornice by using aluminum alloy mold:

Step1: brush a small amount of release oil on mold
Step2: pour water in the barrel and then put gypsum powder in it ; the ratio of water and powder is 1:1.5 ( it means a gourd of water , one and a half bailer of powder)
Step3: dissolve powder in water till no dry powder exists
Step4: stir powder and water into slurry (the speed should be fast ; the faster the better); Appearance of granular powder in slurry is not allowed.

Step5: after pouring slurry for the first time, touch the mold back and forth for twice (fingers should be placed on depressions) then pour slurry again
Step6: wash hands and then grab some glass fiber to spread on the mold evenly. After that, press glass fiber with slurry pouring on them
Step7: trim glass fiber in order to make them all be put on the centre of mold

Step8: tie up a pinch of glass fiber on the end of mold with a rope and flatten the surface

Step9: pour remaining slurry; smooth surface with a scraper
Step10: shovel plaster off the edge of mold. After 30 minutes later, gypsum cornice can be released from the mold 

Production line machine by aluminium alloy mould

Plaster cornice production line/ making machine
Gypsum cornice moulding

Used mold:aluminium alloy mold(120pcs mold for one production line)

One pc aluminium alloy mold cost:55 usd
It need 8 labours to operate/handle one production line

Production capacity for One production line:5000pcs cornice /day

Value of one production line:$200000 

Production line for gypsum products
    After 2 years hard-work on making the automatic gypsum products producing machine, Guangzhou xingyang decoration company finally achieved success in 2014, the machine have advantages as bellow: stable, low cost, good quality, high proficiency, energy-saving and manpower-saving.
By using this production line to produce gypsum products, we changed the situation of the whole industry related to gypsum products. Before we lack of technology, and the procedure is complicated, needs a lot manpower, wastes a lot of material, and low woking efficiency.

The main features of the machine:
1: High output: 2500—6000PCS per day
2. Low cost: needs less operator, each line only needs 8-10 people to operate it. The total capacity is around 20KW
3. Stable quality: CNC operation, Automatic grouting, automatic lapping. Automatic placing fiberglass mesh, automatic flatten,
Technical reference:
The type: XY-70
Installed capacity: 20kw
Machine size : 4*70 meters
Transmittal mode: plastic core-rubber –tires and chain
Highest pressure: 0.5mpa              
Working air pressure: 0.5m  
Installed quantity: 130pcs                        
Main vibration form: Magnetic vibration
Air compressor: 5.5kw
Powder supplying machine: 4kw
Mixer: 5kw
Powder feeding machine: 1.5kw
Beating machine:3.7kw
Main engine: 2.2kw
Molds returning: 1kw
Brush and fiber:1.2kw

1.the specification produced by the production line

Product name gypsum ceiling/wall cornice manufacturerfactory manufacturer plaster gypsum ceiling cornice machine
Model DY-75
Size 45-60*4*3.5(M)
Production Speed 15m/min
Color Customer order
Weight 17t
Application Customized
Power 26.58kw
Transmission Model Machine
Feature Environmental, energy saving
Application Decoration


2. Product Description

1. There is a 10t gypsum bin in the equipment it will save labor.


2. Gypsum Power will be sent by Gypsum bin. The proportion of water and powder will be controlled by PLC computer. Full automatically beating machine will operate gypsum slurry. So it help us to save the labor.


3. It is very easy to operate due to beating machine we using German advanced technology it can work 24 hours continuously and no blocking and uniform stable,

Gypsum Cornice with pore-free bubbles, high intensity and pattern full luster etc


4. The Mould it can automatically cleaning . Dongyue patent technology will not leave residue and damage mould so the mould lifetime will be extended.


5. Installed power 26.85 kw ; actual production power 17 kwh.Low energy consumption, energy conservation and environmental protection.


6. 11 pieces of transducers with low noise and Soft start-up technology it will extend equipment lifetime at least 15 years


7. Two pieces of Plc computer programmed it is easy for worker to learn.


8. The equipment with digital display it will tell you the daily production also let you more profession through the digital reflect water, powder, equipment running speed.


3. Product Show:

1. competitive price

2. accpet OEM orders
3. first-class after-sale service


4. Materials are non combustible, asbestos free, vermin proof, strong and durability
5. Easy and fast to install
6. Smooth finishes decoration
7. We are seeking overseas buyer to represent our products in their country


4. Gypsum Cornice Machine Working Process



1. Dosing system, to get the qualified gypsum powder slurry


2. Automatic weighing system, and screw conveyer


3. Raw material liquid Feeding system, to discharge liquid raw materials onto forming mold


4. Scrape the gypsum cornice automatically, to make sure smooth surface and good shape


5. Mold-separating, to get formed gypsum cornice out of mold


6. Drying, to hang gypsum cornice to dry naturally


7. Discharging and packing system

Our Company

Aabout us.

          Our company was established in 1998,located in Baiyun district Guangzhou city with the building
area of about 3000 sqm.
           We are specializing in producing gypsum one-piece art ceiling, all kinds of gypsum decorative
products, GRG products & moulds. We are the manufacturer specializing in gypsum /plaster products.
The main products include GlassFiber Reinforced Gypsum(GRG) Gypsum ceiling boards, Gypsum boards
keels,gypsum cornice, rose, medallion etc. We are a professional enterprise in research, design,
manufacturing, marketing, decoration & after-sales service.

            Guangzhou Glory building Materials Co.,Ltd is located at Baiyun District, Guangzhou City, China,
which is adjacent to Guangzhou Baiyun Avenue, Beijing-Zhuhai express & South China Highway. The area
of factory is 12,000m2.Our annually production capacity is over 300,000 pieces for the gypsum one-piece
art ceiling, gypsum cornice, GRG mould, gypsum glue and so on. After long-term practice & endeavors of our
company, we have developed our national patent product---Gypsum One-piece Art Ceiling. 


Factory and showroom view.


Large production and stock.



Container loading.





Our most professional package Transport of large trucks to the seaport International transport cooperation


Our Service

1. OEM Manufacturing welcome: Product, Package... 
2. Sample order 
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products.
When you got the goods, test them, and give me a feedback.If you have any questions about the
problem, contact with us, we will offer the solve way for you.


Q1. What is your terms of packing?
A: Generally, we can pack the goods in shinker or wooden box.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and
packages before you pay the balance.

Q3. What is your terms of delivery?

Q4. How about your delivery time?
A: Generally, it will take 7 to 30 days after receiving your advance payment. The specific delivery
time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the
sample cost and the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends
with them, no matter where they come from.

Q9:How to start the order?
A:1.Download the catalogue,send email to us or add our whatsapp to get price and picture.
    2.View the catalogue and choose the item and quantity you need,get back to us.
    3.We will send you quotation,plz arrange 30% deposit after you comfirm the order.
    4.We start the production after get your deposit.
    5.Please arrange the banlance after we inform you the order is finish.then we will arrange 
       the shipping to send the goods after we get your payment.



Cornice mould catalogue download.

View from china server:


Catalogue of moulds for gypsum cornice 2017.pdf    

0086 13570014940
Email address:


Raw material and machine for make gypsum cornice

Gypsum powder Release oil Plastic film for cornice pack Fiberglass mesh
Packing machine  Fiberglass cutting machine  Pearl cotton foam  Gypsum glue/binder

Other Products

Gypsum product/cornice Gypsum cornice production line
Plaster moulding machine
Aluminum mould for gypsum cornice Silicon/latex rubber mould for gypsum cornice
Pu cornice/polyurethane cornice Eps moulding/ps cornice  Drywall/sheetrock board  Gypsum ceiling board
Golden ypsum product/cornice Silicon/latex rubber mould for gypsum ceiling board GRG component/project Silicon mould cover for spary paint golden gypsum cornice
Fiberglass mould for make gypsum cornice Fiberglass mould for make gypsum medallion/ceiling rose Gypsum roman pillar/column/capitals 3D wall panel/relief

0086 13570014940
Email address:



Related Products :
aluminium alloy mold-for machine and handmake
aluminium alloy mold-for machine and handmake